27kv Pole Mounted Sectionalizer with Fault Monitoring System

• Customization: Available
• Type: High-voltage
• Structure: Double-column Disconnector
• Model NO.: FDZ
• Installation: Outdoor High-voltage
• Operation: Manual
• Grounding Mode: Grounding
• Movement Mode: Vertical Rotary Type
• Certification: ISO
• Transport Package: Wooden
• Specification: 27KV
• Trademark: HEMG
• Origin: China
• Production Capacity: 50000

Product Description

	ITEM  1  : SECTIONALIZERS 1 POLE  15 KV PROGRAMMABLE
ITEM	SPECIFICATIONS	UNIT	REQUIRED	GUARANTEED
1	GENERAL DATA
1.01	COUNTRY OF ORIGIN.		INDICATE	CHINA
1.02	MANUFACTURER		INDICATE	HEMG
1.03	MODEL.		INDICATE	FDK-15KV
1.04	STANDARD OF MANUFACTURE		ANSI C37.63 or IEC	ANSI C37.63/IEC
1.05	TYPE		OUTDOOR	OUTDOOR
1.06	SYSTEM		1 POLE ( SINGLE POLE)	SINGLE POLE
1.07	TYPE OF OPERATION		AUTOMATYC AND MANUAL	AUTOMATIC AND MANUAL
1.08	ALITUDE OF OPERATION	MOSL	FROM 500 TO 4500	UP TO 4500M
1.09	TYPE OF PERFORMANCE ACCORDING TO CONFIGURATION (1 POLE, TWO POLE OR 3 POLE)		AUTOMATYC AND MANUAL	AUTOMATIC AND MANUAL
2	NOMINAL DATA BASE SUPPORT OF SECTIONALIZER
2.01	NOMINAL FRECUENCY.		60 HZ	60HZ
2.02	VOLTAGE CHARACTERISTICS.
	NOMINAL VOLTAGE OF THE SYSTEM.	KV	10, 13.2, 13.8	10..13.2.13.8
	MAXIMUM VOLTAGE OF THE SYSTEM.	KV	15	15
2.03	INSULATION LEVEL.
	NOMINAL VOLTAGE	KV	15	15
	WITHSTAND VOLTAGE INDUSTRIAL FREQUENCY  1 MINUTE	KVp	50	50
	WITHSTAND VOLTAGE IMPULSE 1.2/50 us	KVp	125	125
	LEAKAGE DISTANCE	MM/KV	25	25
2.04	CURRENT CHARACTERISTICS
	NOMINAL CURRENT	A	100 OR MORE	100A
	CURRENT OF NOMINAL SYMMETRICAL INTERRUPTION.	KA	4 OR MORE	8
	PEAK VALUE OF FAULT CURRENT.	KA	10 OR MORE	10
2.05	MANUFACTURE  CHARACTERISTICS.
	ISOLATING MATERIAL.		PORCELAIN OR SILICON RUBBER	PORCELAIN
	DRIVER SECTION RANGE.	MM2	35 TO 120	35 TO 120MM2
	CABLE MATERIAL ADMISSIBLE.		Cu / Al	CU/AL
3	SECTIONALIZER CHARACTERISTICS.
	RANGE OF CURRENT ACTION.	A	FROM 5 TO 230	5A-230A
	STEP CURRENT GRADUATION.	A	1	1A
	PRE-LOAD CURRENT (ATTACH PRE-LOAD CURVE).	A	0.5 OR LESS	0.3A
	NUMBER OF OPENING COUNTINGS.		1, 2, 3 AND 4	1, 2, 3 AND 4
	CURRENT BLOCKING OF INRUSH.		YES
	DETECTION OF DEADLINE.	mamp	300 OR LESS	300mA
	DEADLINE VERIFICATION TIME.	msecond	100 or less	100mS
	MAXIMUM MEMORY TIME WITH DEADLINE.	s	between 30 and 300	30s-300s
	TOTAL OPENING TIME.	s	0.5 or less	0.5S
	MEMORY RESET TIME (ACCOUNTS).	s	from 10 to 80 in steps og 1 sec	from 10 to 80 in steps of 1 sec
	ADMISSIBLE CURRENT OF SHORT DURATION.
	1 sec	KA	10	10
	2 sec.	KA	4	4
3.11	PEAK CURRENT VALUE ADMISSIBLE.	KA	16	16
3.12	PREPARED FOR DISTANCE ACCESS WITH DNP PROTOCOL.			YES
3.13	PORT OF COMMUNICATION (FOR THE CONCENTRATOR).
3.14	COMMUNICATION PROTOCOL.			IEC60870-5-101
3.15	SOFTWARE AND ACCESSORIES FOR COMMUNICATION AND CONFIGURATION OF THE SECTIONALIZER THROUGH LAPTOP (FUNCTIONAL PARAMETERS AND STATISTICAL CONSULTATION STORED)			YES
3.16	THE UNIT OF THE INTERFACE TOOL MUST BE CONSIDERED FOR EVERY 50 UNITS OF SECTIONALIZERS.			YES
	ITEM  2  : SECTIONALIZERS 1 POLE  27 KV PROGRAMMABLE
ITEM	SPECIFICATIONS	UNIT	REQUIRED	GUARANTEED
1	GENERAL DATA
1.01	COUNTRY OF ORIGIN.		INDICATE	CHINA
1.02	MANUFACTURER		INDICATE	HEMG
1.03	MODEL.		INDICATE	FDK-27KV
1.04	STANDARD OF MANUFACTURE		ANSI C37.63 or IEC	ANSI C37.63 /IEC
1.05	TYPE		OUTDOOR	OUTDOOR
1.06	SYSTEM		1 POLE ( SINGLE POLE)	SINGLE POLE
1.07	TYPE OF OPERATION		AUTOMATYC AND MANUAL	AUTOMATIC AND MANUAL
1.08	ALITUDE OF OPERATION	MOSL	FROM 500 TO 4500	UP TO 4500
1.09	TYPE OF PERFORMANCE ACCORDING TO CONFIGURATION (1 POLE, TWO POLE OR 3 POLE)		AUTOMATYC AND MANUAL	AUTOMATIC AND MANUAL
2	NOMINAL DATA BASE SUPPORT OF SECTIONALIZER
2.01	NOMINAL FRECUENCY.		60 HZ	60HZ
2.02	VOLTAGE CHARACTERISTICS.
	NOMINAL VOLTAGE OF THE SYSTEM.	KV	22.9	22.9
	MAXIMUM VOLTAGE OF THE SYSTEM.	KV	27	27
2.03	INSULATION LEVEL.
	NOMINAL VOLTAGE	KV	227	27
	WITHSTAND VOLTAGE INDUSTRIAL FREQUENCY  1 MINUTE	KVp	60	60
	WITHSTAND VOLTAGE IMPULSE 1.2/50 us	KVp	150	50
	LEAKAGE DISTANCE	MM/KV	25	25
2.04	CURRENT CHARACTERISTICS
	NOMINAL CURRENT	A	100 OR MORE	100
	CURRENT OF NOMINAL SYMMETRICAL INTERRUPTION.	KA	4 OR MORE	4
	PEAK VALUE OF FAULT CURRENT.	KA	10 OR MORE	10
2.05	MANUFACTURE  CHARACTERISTICS.
	ISOLATING MATERIAL.		PORCELAIN OR SILICON RUBBER	PROCELAIN
	DRIVER SECTION RANGE.	MM2	35 TO 120	35-120MM2
	CABLE MATERIAL ADMISSIBLE.		Cu / Al	CU/AL
3	SECTIONALIZER CHARACTERISTICS.
	RANGE OF CURRENT ACTION.	A	FROM 5 TO 230	FROM 5 TO 230A
	STEP CURRENT GRADUATION.	A	1	1
	PRE-LOAD CURRENT (ATTACH PRE-LOAD CURVE).	A	0.5 OR LESS	0.3
	NUMBER OF OPENING COUNTINGS.		1, 2, 3 AND 4	1,2,3,4
	CURRENT BLOCKING OF INRUSH.		YES	YES
	DETECTION OF DEADLINE.	mamp	300 OR LESS	300
	DEADLINE VERIFICATION TIME.	msecond	100 or less	100
	MAXIMUM MEMORY TIME WITH DEADLINE.	s	between 30 and 300	30-300
	TOTAL OPENING TIME.	s	0.5 or less	0.5
	MEMORY RESET TIME (ACCOUNTS).	s	from 10 to 80 in steps oF 1 sec	FROM 10 TO 80 IN STEPS OF 1 SEC
	ADMISSIBLE CURRENT OF SHORT DURATION.
	1 sec	KA	8	8
	2 sec.	KA	3	3
3.11	PEAK CURRENT VALUE ADMISSIBLE.	KA	20	20
3.12	PREPARED FOR DISTANCE ACCESS WITH DNP PROTOCOL.		YES	YES
3.13	PORT OF COMMUNICATION (FOR THE CONCENTRATOR).		RS-485 OR ETHERNET	RS-485
3.14	COMMUNICATION PROTOCOL.		IEC 60870-5-101 ( IEC104) OR DNP	IEC 60870-5-101
3.15	SOFTWARE AND ACCESSORIES FOR COMMUNICATION AND CONFIGURATION OF THE SECTIONALIZER THROUGH LAPTOP (FUNCTIONAL PARAMETERS AND STATISTICAL CONSULTATION STORED)		YES	YES
3.16	THE UNIT OF THE INTERFACE TOOL MUST BE CONSIDERED FOR EVERY 50 UNITS OF SECTIONALIZERS.		YES	YES
	ITEM 3  :  DATA CONCENTRATOR FOR PROGRAMMABLE SECTIONALIZERS 15 KV AND 27 KV, BIL 150 KV
ITEM	SPECIFICATIONS	UNIT	REQUIRED	GUARANTEED
1	CONCENTRATOR
	MANUFACTURER.		INDICATE	HEMG
	COUNTRY		INDICATE	CHINA
	MODEL.		INDICATE	APT-309
	DISTANCE OF COMMUNICATION VIA RADIO FRECEUNCIA FOR THE COLLECTION OF EVENTS (PERMANENT FAILURES, TEMPORARY FAILURES) FOR THE SECTIONALIZERS NEAR THE CONCENTRATOR.		50 MTS OR MORE	50MTS
	NUMBER OF AIR CIRCULAR SECTIONALISTS FOR RADIO COMMUNICATION WITH THE CONCENTRATOR.		9 OR MORE	9
	COMMUNICATION BETWEEN THE CONCENTRATOR AND THE MANAGEMENT SOFTWARE (FOR CONFIGURATION AND MODIFICATION OF PARAMETERS).		YES	YES
	COMMUNICATION BETWEEN THE CONCENTRATOR AND A SCADA SYSTEM (WITHOUT INTERMEDIATE SOFTWARE) THROUGH DNP3 COMMUNICATION PROTOCOL ON TCP / IP, USING GPRS COMMUNICATION INTERFACE THE ANTENNA MUST BE EXTERNAL OMNIDIRETIONAL, TYPE BOND WITH COAXIAL CABLE AND BNC / SMA CONNECTOR OR SIMILAR WITH GAIN OF 14 DBI OR MORE.		YES	BY IE80670-5-101.104/DNP IS ARAIABLE ,PRICE WILL BE EXTRA ADDING
	EMBOSSED GPRS MODEM.		YES	YES
	INTERNAL POWER SUPPLY BATTERY (MAINTENANCE FREE AND REPLACEABLE).		5 YEARS OR MORE	5
	WITH MEMORY TO STORE LAST FAILURES, EVENTS AND DOWNLOAD THE INFORMATION OF THE SAME EQUIPMENT).		YES	YES
	TYPE OF FAILURE WITH TIME STAMP, CURRENT MEASURES, PRESENCE / ABSENCE OF VOLTAGE OF THE BATTERY, PARAMETERS OF THE MANAGED EQUIPMENT AND STATE OF THE SAME CONCENTRATOR.		YES	YES
	THE INFORMATION STORED IN THE CONCENTRATOR CAN BE MANAGED FROM THE MANAGEMENT SOFTWARE IN A LOCAL AND REMOTE WAY.		YES	YES
	PORT  RJ45 10/100 FOR LOCAL CONFIGURATION		YES	YES
2	SOFTWARE FOR CONFIGURATION AND MANAGEMENT OF THE CONCENTRATOR AND SECTIONALIZER.
	MANUFACTURER.		INDICATE	HEMG
	COUNTRY		INDICATE	CHINA
	MODEL.
	NAME OF THE SOFTWARE.		INDICATE	FAULT MONITORIG SOFTWARE
	EXECUTION UNDER WINDOWS OPERATING SYSTEM.		YES	YES
	DIRECT CONNECTION INTERFACE TO THE EQUIPMENT.		YES	YES
	HANDLING OF USERS, LEVELS AND ACCESS PERMITS.		YES	YES
	MANUFACTURING AND CONFIGURATION MODULE.		YES	YES
	PARAMETERIZATION MODULE OF THE CONCENTRATOR.		YES	YES
	EVENTS DISPLAY MODULE.		YES	YES
	MODULE OF HISTORICAL AND STATISTICAL REPORT.		YES	YES
	EXPORT OF REPORTS TO A CALCULATION SHEET FORMAT.		YES	YES