12kv/24kv/38kv Silicon Rubber Insulating Cover of Ascr AAAC for Over Head Line

• Application: Winding Wire Coating Insulation
• Type: Insulation Sleeve & Tube
• Chemistry: Organic Insulation
• Material: Rubber
• Thermal Rating: H 180
• Maximum Voltage: 20KV~100KV
• Model NO.: SILICON
• Classification: Hybrid Insulation Materials
• Certification: ISO9001
• Color: Brown
• Transport Package: Wooden
• Specification: 12KV/24KV
• Trademark: HEMG
• Origin: China
• Production Capacity: 10000

Product Description

	ITEM 1  : INSULATION COVER FOR 70 MM2  - 15 KV
ITEM	SPECIFICATIONS	UNIT	REQUIRED	GUARANTEED
1	GENERAL DATA
1.1	MANUFACTURER		INDICATE	HEMG
	COUNTRY		INDICATE	China
1.2	MATERIAL OF INSULATION COVER		SILICON RUBBER	SILICONE RUBBER
1.3	MODEL OR CATALOGUE NUMBER		INDICATE	WSKG
1.4	CERTIFICATE ISO 9001 AND ISO 14001		YES	YES
1.5	STANDARDS OF MANUFACTURE AND TESTS		ACCORDING POINT 2
2	CONDITIONS OF OPERATION IN CONTINUOUS REGIME OF THE INSULATING COVERS.
2.1	MAXIMUM VOLTAGE.	KV	15	15
2.3	NOMINAL VOLTAGES OF THE NETWORK.	KV	10, 13.2, 13.8	10, 13.2, 13.8
2.4	FREQUENCY	HZ	60	60
2.5	CALIBER OF CABLES WHERE THEY WILL BE INSTALLED.		UNTIL 70 MM2	UNTIL 70 MM2
2.6	MATERIAL OF THE CABLES WHERE THEY WILL BE INSTALLED.		CU AND AAAC	CU AND AL
3	ELECTRICAL PROPERTIES OF THE COVER MATERIAL (1).
3.1	DIELECTRIC STRENGTH.	KV/CM	175 OR MORE	≥175
3.2	VOLUMETRIC RESISTIVITY.	OHM/CM	1X10  13 OR MORE	1X10  14
3.3	CONSTANT DIELECTRIC.		5 OR LESS	2-3
4	VOLTAGES OF PROOF OF THE COVER (1).
4.1	A NOMINAL FREQUENCY IN DRY 1 MINUTE.	KV	15	15
4.2	A INDUSTRIAL FREQUENCY IN WET 1 MINUTE.	KV	15	15
5	PROPERTIES OF THE MATERIAL OF THE INSULATING COVER (1).
5.1	BREAKING STRAIN.	Mpa	4.8 OR MORE	4
5.2	ELONGATION OF BREAK.	%	200 OR MORE	≥200
5.3	RANGE OF OPERATING TEMPERATURE.	°C	FROM -10 TO +100	from -10C to +100C
5.4	WATER ABSORPTION.	%	1 OR LESS	1 or less
5.5	RESISTANCE TO UV RAYS.		YES	yes
5.6	RESISTANT TO TRACKING		YES	yes
5.7	RESSITANTE TO THE MOZONO.		YES	yes
5.8	RESISTANT TO URIC ACID AND FATS.		YES	yes
5.9	RESISTANT TO THE RIPPED.		YES	yes
6	DIMENSIONS AND DESIGN OF THE COVERS (2).
6.1	COVER DESIGN		INDICATE ADN SCHEME
6.2	THICKNESS.	mm	INDICATE.	≥2.3
6.3	INSIDE DIAMETER.	mm	INDICATE	12
6.4	CABLE CALIBERS TO COVER.	mm2	INDICATE	70
6.5	LABELED.		BRAND AND MODEL	No
7	INSTALLATION OF COVER WITH ENERGIZED LINE AND ITS ACCESSORIES (3).
7.1	EASY TO INSTALL.		YES , INCLUDE GUIDE	YES , INCLUDE GUIDE Pay attention to the personal safety with energized line
7.2	INCLUDE RETAIN ACCESSORIES FOR FIXING THE CABLES AND AVOIDING SLIDES AFTER INSTALLATION.		YES, TWO UNITS FOR EVERY 10 MTS OF COVER.	CABLE TIE
7.3	INCLUDE TOOLS FOR INSTALLATION AND CLOSURE OF THE COVER THAT GUARANTEE THAT DURING ITS OPERATION IS SLIDING ON THE CABLE AND PERIMETER ITS MOUNTING FROM A FIXED POINT OF THE INSTALLER WITH THE SPECIFIED TOOL.		YES, 5 EQUIPMENTS FOR MOUNTING	YES
7.4	REUSABLE.		YES	YES, IF REQUIRED, WITHOUT GLUE
8	PACKING REQUIREMENTS.
8.1	METERS OF COVER BY ROLL.	MTS	INDICATE	100
8.2	WEIGHT OF EACH ROLL.	KG	INDICATE	10
8.3	PACKAGING RESISTANT TO BLOWS AND FALL OF ACIDS.		INDICATE	YES
9	PRESENT SAMPLE  OF THE COVER AND FIXING ACCESSORIES.		YES, COVER AND ACCESORIE FOR MOUNTING.	YES
	NOTE   :
	THE PROPERTIES OF THE INSULATING COVERS ARE REFERRED TO THE MANUFACTURING STANDARDS INDICATED IN THE NUMBER 2 attached.
	IT MUST INCLUDE ROOF DESIGN DESIGNS INDICATING ALL DIMENSIONS, PLANS OF ACCESSORIES, FLATS OF FIXING ELEMENTS AND CLOSURE OF INSULATING COVERS.
	THE FOLLOWING TECHNICAL DOCUMENTATION MUST BE INCLUDED.
	Installation manuals, information on the technical characteristics of the fixing accessories, closure of the insulating covers and manuals for the use of the tools.
	ITEM 2  : INSULATION COVER FOR 70 MM2  - 25 KV
ITEM	SPECIFICATIONS	UNIT	REQUIRED	GUARANTEED
1	GENERAL DATA
1.1	MANUFACTURER		INDICATE	HEMG
	COUNTRY		INDICATE	China
1.2	MATERIAL OF INSULATION COVER		SILICON RUBBER	SILICONE RUBBER
1.3	MODEL OR CATALOGUE NUMBER		INDICATE	WSKG
1.4	CERTIFICATE ISO 9001 AND ISO 14001		YES	YES
1.5	STANDARDS OF MANUFACTURE AND TESTS		ACCORDING POINT 2
2	CONDITIONS OF OPERATION IN CONTINUOUS REGIME OF THE INSULATING COVERS.
2.1	MAXIMUM VOLTAGE.	KV	25	25
2.3	NOMINAL VOLTAGES OF THE NETWORK.	KV	22.9	22.9
2.4	FREQUENCY	HZ	60	60
2.5	CALIBER OF CABLES WHERE THEY WILL BE INSTALLED.		UNTIL 70 MM2	UNTIL 70 MM2
2.6	MATERIAL OF THE CABLES WHERE THEY WILL BE INSTALLED.		CU AND AAAC	CU AND AL
3	ELECTRICAL PROPERTIES OF THE COVER MATERIAL (1).
3.1	DIELECTRIC STRENGTH.	KV/CM	175 OR MORE	≥175
3.2	VOLUMETRIC RESISTIVITY.	OHM/CM	1X10  13 OR MORE	1X10  14
3.3	CONSTANT DIELECTRIC.		5 OR LESS	2-3
4	VOLTAGES OF PROOF OF THE COVER (1).
4.1	A NOMINAL FREQUENCY IN DRY 1 MINUTE.	KV	25	25
4.2	A INDUSTRIAL FREQUENCY IN WET 1 MINUTE.	KV	25	25
5	PROPERTIES OF THE MATERIAL OF THE INSULATING COVER (1).
5.1	BREAKING STRAIN.	Mpa	4.8 OR MORE	4
5.2	ELONGATION OF BREAK.	%	200 OR MORE	≥200
5.3	RANGE OF OPERATING TEMPERATURE.	°C	FROM -10 TO +100	from -10C to +100C
5.4	WATER ABSORPTION.	%	1 OR LESS	1 or less
5.5	RESISTANCE TO UV RAYS.		YES	yes
5.6	RESISTANT TO TRACKING		YES	yes
5.7	RESSITANTE TO THE MOZONO.		YES	yes
5.8	RESISTANT TO URIC ACID AND FATS.		YES	yes
5.9	RESISTANT TO THE RIPPED.		YES	yes
6	DIMENSIONS AND DESIGN OF THE COVERS (2).
6.1	COVER DESIGN		INDICATE ADN SCHEME
6.2	THICKNESS.	mm	INDICATE.	≥3
6.3	INSIDE DIAMETER.	mm	INDICATE	12
6.4	CABLE CALIBERS TO COVER.	mm2	INDICATE	70
6.5	LABELED.		BRAND AND MODEL	No
7	INSTALLATION OF COVER WITH ENERGIZED LINE AND ITS ACCESSORIES (3).
7.1	EASY TO INSTALL.		YES , INCLUDE GUIDE	YES , INCLUDE GUIDE Pay attention to the personal safety with energized line
7.2	INCLUDE RETAIN ACCESSORIES FOR FIXING THE CABLES AND AVOIDING SLIDES AFTER INSTALLATION.		YES, TWO UNITS FOR EVERY 10 MTS OF COVER.	CABLE TIE
7.3	INCLUDE TOOLS FOR INSTALLATION AND CLOSURE OF THE COVER THAT GUARANTEE THAT DURING ITS OPERATION IS SLIDING ON THE CABLE AND PERIMETER ITS MOUNTING FROM A FIXED POINT OF THE INSTALLER WITH THE SPECIFIED TOOL.		YES, 5 EQUIPMENTS FOR MOUNTING	YES,
7.4	REUSABLE.		YES	YES, IF REQUIRED, WITHOUT GLUE
8	PACKING REQUIREMENTS.
8.1	METERS OF COVER BY ROLL.	MTS	INDICATE	100
8.2	WEIGHT OF EACH ROLL.	KG	INDICATE	10
8.3	PACKAGING RESISTANT TO BLOWS AND FALL OF ACIDS.		INDICATE	YES
9	PRESENT SAMPLE  OF THE COVER AND FIXING ACCESSORIES.		YES, COVER AND ACCESORIE FOR MOUNTING.	YES
	NOTE   :
	THE PROPERTIES OF THE INSULATING COVERS ARE REFERRED TO THE MANUFACTURING STANDARDS INDICATED IN THE NUMBER 2 attached.
	IT MUST INCLUDE ROOF DESIGN DESIGNS INDICATING ALL DIMENSIONS, PLANS OF ACCESSORIES, FLATS OF FIXING ELEMENTS AND CLOSURE OF INSULATING COVERS.
	THE FOLLOWING TECHNICAL DOCUMENTATION MUST BE INCLUDED.
	Installation manuals, information on the technical characteristics of the fixing accessories, closure of the insulating covers and manuals for the use of the tools.
	ITEM 3  : INSULATION COVER FOR 120 MM2  - 15 KV
ITEM	SPECIFICATIONS	UNIT	REQUIRED	GUARANTEED
1	GENERAL DATA
1.1	MANUFACTURER		INDICATE	HEMG
	COUNTRY		INDICATE	China
1.2	MATERIAL OF INSULATION COVER		SILICON RUBBER	SILICONE RUBBER
1.3	MODEL OR CATALOGUE NUMBER		INDICATE	WSKG
1.4	CERTIFICATE ISO 9001 AND ISO 14001		YES	YES
1.5	STANDARDS OF MANUFACTURE AND TESTS		ACCORDING POINT 2	YES
2	CONDITIONS OF OPERATION IN CONTINUOUS REGIME OF THE INSULATING COVERS.
2.1	MAXIMUM VOLTAGE.	KV	15	15
2.3	NOMINAL VOLTAGES OF THE NETWORK.	KV	10, 132, 13.8	10, 13.2, 13.8
2.4	FREQUENCY	HZ	60	60
2.5	CALIBER OF CABLES WHERE THEY WILL BE INSTALLED.		UNTIL  120 MM2	UNTIL 120 MM2
2.6	MATERIAL OF THE CABLES WHERE THEY WILL BE INSTALLED.		CU AND AAAC	CU AND AL
3	ELECTRICAL PROPERTIES OF THE COVER MATERIAL (1).
3.1	DIELECTRIC STRENGTH.	KV/CM	175 OR MORE	≥175
3.2	VOLUMETRIC RESISTIVITY.	OHM/CM	1X10  13 OR MORE	1X10  14
3.3	CONSTANT DIELECTRIC.		5 OR LESS	2-3
4	VOLTAGES OF PROOF OF THE COVER (1).
4.1	A NOMINAL FREQUENCY IN DRY 1 MINUTE.	KV	15	15
4.2	A INDUSTRIAL FREQUENCY IN WET 1 MINUTE.	KV	15	15
5	PROPERTIES OF THE MATERIAL OF THE INSULATING COVER (1).
5.1	BREAKING STRAIN.	Mpa	4.8 OR MORE	4
5.2	ELONGATION OF BREAK.	%	200 OR MORE	≥200
5.3	RANGE OF OPERATING TEMPERATURE.	°C	FROM -10 TO +100	from -10C to +100C
5.4	WATER ABSORPTION.	%	1 OR LESS	1 or less
5.5	RESISTANCE TO UV RAYS.		YES	yes
5.6	RESISTANT TO TRACKING		YES	yes
5.7	RESSITANTE TO THE MOZONO.		YES	yes
5.8	RESISTANT TO URIC ACID AND FATS.		YES	yes
5.9	RESISTANT TO THE RIPPED.		YES	yes
6	DIMENSIONS AND DESIGN OF THE COVERS (2).
6.1	COVER DESIGN		INDICATE ADN SCHEME
6.2	THICKNESS.	mm	INDICATE.	≥2.3
6.3	INSIDE DIAMETER.	mm	INDICATE	15.6
6.4	CABLE CALIBERS TO COVER.	mm2	INDICATE	120
6.5	LABELED.		BRAND AND MODEL	No
7	INSTALLATION OF COVER WITH ENERGIZED LINE AND ITS ACCESSORIES (3).
7.1	EASY TO INSTALL.		YES , INCLUDE GUIDE	YES , INCLUDE GUIDE Pay attention to the personal safety with energized line
7.2	INCLUDE RETAIN ACCESSORIES FOR FIXING THE CABLES AND AVOIDING SLIDES AFTER INSTALLATION.		YES, TWO UNITS FOR EVERY 10 MTS OF COVER.	CABLE TIE
7.3	INCLUDE TOOLS FOR INSTALLATION AND CLOSURE OF THE COVER THAT GUARANTEE THAT DURING ITS OPERATION IS SLIDING ON THE CABLE AND PERIMETER ITS MOUNTING FROM A FIXED POINT OF THE INSTALLER WITH THE SPECIFIED TOOL.		YES, 5 EQUIPMENTS FOR MOUNTING	YES
7.4	REUSABLE.		YES	YES, IF REQUIRED, WITHOUT GLUE
8	PACKING REQUIREMENTS.
8.1	METERS OF COVER BY ROLL.	MTS	INDICATE	100
8.2	WEIGHT OF EACH ROLL.	KG	INDICATE	10
8.3	PACKAGING RESISTANT TO BLOWS AND FALL OF ACIDS.		INDICATE	YES
9	PRESENT SAMPLE  OF THE COVER AND FIXING ACCESSORIES.		YES, COVER AND ACCESORIE FOR MOUNTING.	YES
	NOTE   :
	THE PROPERTIES OF THE INSULATING COVERS ARE REFERRED TO THE MANUFACTURING STANDARDS INDICATED IN THE NUMBER 2 attached.
	IT MUST INCLUDE ROOF DESIGN DESIGNS INDICATING ALL DIMENSIONS, PLANS OF ACCESSORIES, FLATS OF FIXING ELEMENTS AND CLOSURE OF INSULATING COVERS.
	THE FOLLOWING TECHNICAL DOCUMENTATION MUST BE INCLUDED.
	Installation manuals, information on the technical characteristics of the fixing accessories, closure of the insulating covers and manuals for the use of the tools.
	ITEM 4  : INSULATION COVER FOR 120 MM2  - 25 KV
ITEM	SPECIFICATIONS	UNIT	REQUIRED	GUARANTEED
1	GENERAL DATA
1.1	MANUFACTURER		INDICATE	HEMG
	COUNTRY		INDICATE	China
1.2	MATERIAL OF INSULATION COVER		SILICON RUBBER	SILICONE RUBBER
1.3	MODEL OR CATALOGUE NUMBER		INDICATE	WSKG
1.4	CERTIFICATE ISO 9001 AND ISO 14001		YES	YES
1.5	STANDARDS OF MANUFACTURE AND TESTS		ACCORDING POINT 2
2	CONDITIONS OF OPERATION IN CONTINUOUS REGIME OF THE INSULATING COVERS.
2.1	MAXIMUM VOLTAGE.	KV	25	25
2.3	NOMINAL VOLTAGES OF THE NETWORK.	KV	22.9	22.9
2.4	FREQUENCY	HZ	60	60
2.5	CALIBER OF CABLES WHERE THEY WILL BE INSTALLED.		UNTIL  120 MM2	UNTIL 120 MM2
2.6	MATERIAL OF THE CABLES WHERE THEY WILL BE INSTALLED.		CU AND AAAC	CU AND AL
3	ELECTRICAL PROPERTIES OF THE COVER MATERIAL (1).
3.1	DIELECTRIC STRENGTH.	KV/CM	175 OR MORE	≥175
3.2	VOLUMETRIC RESISTIVITY.	OHM/CM	1X10  13 OR MORE	1X10  14
3.3	CONSTANT DIELECTRIC.		5 OR LESS	2-3
4	VOLTAGES OF PROOF OF THE COVER (1).
4.1	A NOMINAL FREQUENCY IN DRY 1 MINUTE.	KV	15	15
4.2	A INDUSTRIAL FREQUENCY IN WET 1 MINUTE.	KV	15	15
5	PROPERTIES OF THE MATERIAL OF THE INSULATING COVER (1).
5.1	BREAKING STRAIN.	Mpa	4.8 OR MORE	4
5.2	ELONGATION OF BREAK.	%	200 OR MORE	≥200
5.3	RANGE OF OPERATING TEMPERATURE.	°C	FROM -10 TO +100	from -10C to +100C
5.4	WATER ABSORPTION.	%	1 OR LESS	1 or less
5.5	RESISTANCE TO UV RAYS.		YES	yes
5.6	RESISTANT TO TRACKING		YES	yes
5.7	RESSITANTE TO THE MOZONO.		YES	yes
5.8	RESISTANT TO URIC ACID AND FATS.		YES	yes
5.9	RESISTANT TO THE RIPPED.		YES	yes
6	DIMENSIONS AND DESIGN OF THE COVERS (2).
6.1	COVER DESIGN		INDICATE ADN SCHEME
6.2	THICKNESS.	mm	INDICATE.	≥3
6.3	INSIDE DIAMETER.	mm	INDICATE	15.6
6.4	CABLE CALIBERS TO COVER.	mm2	INDICATE	120
6.5	LABELED.		BRAND AND MODEL	No
7	INSTALLATION OF COVER WITH ENERGIZED LINE AND ITS ACCESSORIES (3).
7.1	EASY TO INSTALL.		YES , INCLUDE GUIDE	YES , INCLUDE GUIDE Pay attention to the personal safety with energized line
7.2	INCLUDE RETAIN ACCESSORIES FOR FIXING THE CABLES AND AVOIDING SLIDES AFTER INSTALLATION.		YES, TWO UNITS FOR EVERY 10 MTS OF COVER.	CABLE TIE
7.3	INCLUDE TOOLS FOR INSTALLATION AND CLOSURE OF THE COVER THAT GUARANTEE THAT DURING ITS OPERATION IS SLIDING ON THE CABLE AND PERIMETER ITS MOUNTING FROM A FIXED POINT OF THE INSTALLER WITH THE SPECIFIED TOOL.		YES, 5 EQUIPMENTS FOR MOUNTING	YES
7.4	REUSABLE.		YES	YES, IF REQUIRED, WITHOUT GLUE
8	PACKING REQUIREMENTS.
8.1	METERS OF COVER BY ROLL.	MTS	INDICATE	100
8.2	WEIGHT OF EACH ROLL.	KG	INDICATE	10
8.3	PACKAGING RESISTANT TO BLOWS AND FALL OF ACIDS.		INDICATE	YES
9	PRESENT SAMPLE  OF THE COVER AND FIXING ACCESSORIES.		YES, COVER AND ACCESORIE FOR MOUNTING.	YES
	NOTE   :
	THE PROPERTIES OF THE INSULATING COVERS ARE REFERRED TO THE MANUFACTURING STANDARDS INDICATED IN THE NUMBER 2 attached.
	IT MUST INCLUDE ROOF DESIGN DESIGNS INDICATING ALL DIMENSIONS, PLANS OF ACCESSORIES, FLATS OF FIXING ELEMENTS AND CLOSURE OF INSULATING COVERS.
	THE FOLLOWING TECHNICAL DOCUMENTATION MUST BE INCLUDED.
	Installation manuals, information on the technical characteristics of the fixing accessories, closure of the insulating covers and manuals for the use of the tools.