Ied′s Differential Protection and Automatic System of 69kv Line

• Task: Program
• Structure: Combination
• Mathematical Model: Linear
• Signal: Continuous
• Function: Automatic Control, Protection, Monitoring, Measurement
• Certification: ISO: 9001, CE
• Model NO.: SEL311L
• Condition: New
• Customized: Non-Customized
• Transport Package: Carton with Wooden
• Specification: 6-66KV
• Trademark: SEL/ABB/SCHNEIDER/CHINA
• Origin: China
• Production Capacity: 100000

Product Description

 

IED´S LINE PROTECTION RELAY			69KV
PROTECTIONS
QUANTITY		2	2
MOUNTING		INCLUDING WHERE CNEL EP INDICATE	YES
LINE DIFERECIAL		87 L	87L
DISTANCE FROM LINE		LESS than 100 km, which the supplier provides if need DIMMER	Approximately 100KM
PUTT - POTT-PROTECTION SCHEME		BASED ON ANSI 78	ANSI 78
DISTANCE		21, MHO AND CUDRILATERAL; OR ONLY QUADRILATERAL	21, MHO,QUADRILATERAL
FAULT LOCATOR		21 FL, PROGRAMMABLE	21 FL, PROGRAMMABLE
OVERCURRENT ( 1 and 2 WINDINGS )); CURVES ANSI - IEC		50/51	50/51
		50N/51N	50N/51N
		5OG / 51G	5OG / 51G
DIRECTIONAL		67 F, 67 N	67 , 67 N
POLARIZATION		BY VOLTAGE OR CURRENT	VOLTAGE
ADJUSTMENTS OF ANGLES		RCA/ROA	RCA
FAULT FUSE		YES, TO BLOCK THE DISTANCE IN CASE OF LOSS OF VOLTAGE FROM THE PT´S	YES, TO BLOCK THE DISTANCE IN CASE OF LOSS OF VOLTAGE FROM THE PT´S
HIGH IMPEDANCE FAULT		HIGH IMPEDANCE FAULT	HIGH IMPEDANCE FAULT
LOW VOLTAGE		27; PROGRAMMABLE BY THE USER	27; PROGRAMMABLE BY THE USER
OVER VOLTAGE		79y PROGRAMMABLE BY THE USER	59 PROGRAMMABLE BY THE USER
BREAKER FAILURE		50BF	YES
PROTOCOL		IEEE C37.94	IEEEC37.94
MEASUREMENTS
I dif.		Differential current	YES
(I) bar.		Current restraining	YES
I		Primary and secondary winding current	YES
CURRENT		I	YES
VOLTAGE		V	YES
POWER FACTOR		FP	YES
POWERS		ACTIVE, REACTIVE AND APPARENT	ACTIVE, REACTIVE AND APPARENT
KEYPAD OPTION
OPEN			YES
CLOSE			YES
TRIGGER		TRIPOLAR	YES
EVENT LOG
OSCILOGRAFIAS		Pre fails - post failure	YES
DATE			YES
TIME			YES
FAULT CURRENT SEQUENCE +, - AND 0			YES
FAULT SIGNALLING		USE OF LED	LDC AND LED
INPUTS AND DIGITAL OUTPUTS
DIGITAL INPUTS		6 MINIMUM	16
DIGITAL OUTPUTS		6 MINIMUM	14
CURRENT NOMINAL SECONDARY		1-5 AMP	1 A  AND 5A
ADJUST TAP		LESSER or equal 0.5 In	YES
STANDARDS		ANSI-IEC	ANSI  IEC
POWER SUPPLY 1		80-240 VDC	24 - 48Vdc 1 48 - 110Vdc (40-100Vac) 110 - 250Vdc (100-240Vac)
POWER 2		80-240 Vac	NA
PULSES OF VOLTAGE		DIGITAL INPUT, DIGITAL OUTPUT	60%-80%Uaux
WARRANTY
10 YEARS		MINIMUM	2years
TERMINAL TEST - SHORTCIRCUITABLE
TERMINAL TEST - SHORTCIRCUITABLE		SHORTCIRCUITABLE TERMINALS AND TESTS SHOULD COME WITH THE INSTALLATION MANUAL IN SPANISH, THE TERMINAL BOARD MUST BE ABLE TO WITHSTAND VALUE OF INJECTION OF SECONDARY CURRENT MINIMUM 100 A. IS ACCEPTED THAT THE TWO TERMINALS COME IN A SINGLE ELEMENT, IN CASE THAT THE PURCHASE INCLUDE BOARD POSITION, TERMINALS MUST BE ALREADY INSTALLED AND READY TO OPERATE. THE PROTECTIONS OF CNEL EP GROUP WILL CARRY OUT INJECTION TESTING ALTOGETHER WITH A TECHNICIAN OF MANUFACTURES OR SERVICEMAN OF THE OFFEROR AND VERIFY THE OPERATION THEREOF IN CONJUNCTION WITH THE PROTECTION RELAY.	yes
CERTIFICATES
CERTIFICATE OF SOLE REPRESENTATIVE AUTHORIZED BRAND IN PROTECTION RELAYS		OK	YES
CERTIFICATE KEMA IEC 61850-6, 7-1, 7-2, 7-3, 7-4 and 8-1		OK	YES
CERTIFIED ISO STANDARD 9001		OK	YES
CERTIFIED NOTARIZED THAT CONSISTS WITH TECHNICAL IN ECUADOR TO HAVE IMMEDIATE SOLUTIONS.		OK	YES
CERTIFIED TRAINING
TRAINING CERTIFIED IN SPANISH LANGUAGE WITH CERTIFIED INSTRUCTOR FROM FACTORY		1 training 5 days, after that the OFFEROR is required to give training for a year until they are solvent doubts IED´s. this under prior coordination with the administrator of the contract of CNEL EP, these skills will be two-day minimum 5 times A year, to failure to comply with this shall present its poor compliance for future contracts offered by CNEL EP.	YES but the language is English
		2 SUBJECT PROTECTIONS SETTINGS, THE PERSON WHO WILL GIVE THE TRAINING MUST BE PROTECTIONS ENG. AND SHOULD BE IN FULL KNOWLEDGE OF THE SUBJECT, ABLE TO RESOLVE ALL QUESTIONS SUBMITTED AT THAT TIME.	YES but the language is English
		3. COMMUNICATION TO THE CONTRACT ADMINISTRATOR	YES but the language is English
		4. IEC 61850, WANT TO MAKE AN EXAMPLE TWO IED´s this should be demonstrated and IN FULL ACCEPTANCE OF THE GROUP ASSISTANT TO THE TRAINING.	YES but the language is English
		5. EVIDENCE OF CURRENT INJECTION	YES but the language is English
		6. INSTALLATION ON THE SAME FIELD, IF IT REQUESTED SEVERAL INSTALL ONE AS EXAMPLE, PART OF THE TRAINING.	YES but the language is English
LICENSE		FREE (N NUMBER OF USERS)	3
LOCAL TECHNICAL SUPPORT		ADDRESSES, PHONES, RESPONSIBLE WITH STAFF TO SUPPORT TECHNICIAN, DOCUMENT NOTARIZED SIGNATURE	Please contact the local Schneider
MANUAL		Spanish	English/Spanish
AMBIENT TEMPERATURE		MORE THAN 40 DEGREES, LESS THAN THAN 10	-25ºC~+55ºC
COMMUNICATIONS
PORTS	TYPE	DESCRIPTION
FRONT	RJ-45, RS 485	FOR FIELD CONFIGURATION	DB9 RS232
2 PORTS, REAR	FIBER OPTIC	COMMUNICATION WITH OTHER SEPARDOS GEOGRAPHICALLY SUBSTATION RELAY	YES(Optional)
2 PORTS, REAR	ETHERNET	NETWORK CONFIGURATION WITH REDUNDANCY DOUBLE, INTEGRATION TO THE SCADA	YES(The 2^nd Ethernet port is optional)
1 PORT	DB9-IRIG-B	TIME SYNCHRONIZATION	BNC IRIG-B
1 PORT	RS-485	THE SCADA INTEGRATION	YES
The relay should have all the benefits for the installation of the 87's line, with all the useful fiber ports in connection.
PROTOCOLS	IF
	MODBUS/TCP, DNP3/LAN/WAN, FTP, TELNET, PING, IEC 61850		IEC 61850
	SERIAL
	DNP3, MODBUS RTU,		DNP3,MODBUS RTU,IEC103